Student advised, *Corresponding author, # of Publications with Impact Factor ≥10: 10
Journal Articles (58):
[J58]. Wang, F.J., You, S.Y., Jiang, D.Y., Yuan, X.Y., Fu, R., and Ning, F.D.*, 2023. Microstructure Evolution, Phase Formation, Corrosion, and Mechanical Properties of Stainless Steel Fabricated by Extrusion-Based Sintering-Assisted Additive Manufacturing, Additive Manufacturing, Vol. 75, pp.103746-103759.
[J57]. You, S.Y., Jiang, D.Y., Wang, F.J. and Ning, F.D.*, 2023. Anisotropic sintering shrinkage behavior of stainless steel fabricated by extrusion-based metal additive manufacturing, Journal of Manufacturing Processes, Vol. 101, pp.1508-1520.
[J56]. Jiang, D.Y. and Ning, F.D.*, 2023. Bi-metal structures fabricated by extrusion-based sintering-assisted additive manufacturing, Journal of Manufacturing Processes, Vol. 98, pp.216-222. (Fast-tracked Paper from NAMRC2023).
[J55]. Zhou, Y. and Ning, F.D.*, 2023. Directed Energy Deposition with Coaxial Wire-Powder Feeding: Melt Pool Temperature and Microstructure. ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 145, pp.081004-1 - 081004-12.
[J54]. Foroughi, A.H., Valeri, C., Jiang, D., Ning, F.D., Razavi, M. and Razavi, M.J., 2023. Understanding compressive viscoelastic properties of additively manufactured PLA for bone-mimetic scaffold design. Medical Engineering & Physics, Vol. 114, pp.103972-103985.
[J53]. Zhou, Y., Zhang, P., Ning, F.D.*, 2023. Joining of carbon fiber reinforced polymer/titanium stacks using directed energy deposition additive manufacturing. Composite Structures, Vol. 310, pp. 116775-116789.
[J52]. Zhou, Y. and Ning, F.D.*, 2022. Joining CFRP/Ti stacks by directed energy deposition: Surface topography effects on interface formation and bonding. Composites Part B: Engineering, Vol. 247, pp. 110365-110377.
[J51]. Jiang, D.Y. and Ning, F.D.*, 2022. Physical-Mechanical Behaviors of Stainless Steel Plate-Lattice Built by Material Extrusion Additive Manufacturing. Journal of Materials Processing Technology, Vol. 309, pp. 117739-117748.
[J50]. Wang, F.J., You, S.Y., Jiang, D.Y., and Ning, F.D.*, 2022. Study on sintering mechanism for extrusion-based additive manufacturing of stainless steel through molecular dynamics simulation. Additive Manufacturing, Vol. 58, pp. 102991-103003.
[J49]. Zhou, Y., Abbara, E.M., Jiang, D.Y., Azizi, A., Poliks, M.D. and Ning, F.D.*, 2022. High-cycle fatigue properties of curved-surface AlSi10Mg parts fabricated by powder bed fusion additive manufacturing. Rapid Prototyping Journal, Vol. 28, No. 7, pp. 1346-1360.
[J48]. Jiang, D.Y. and Ning, F.D.*, 2022, “Anisotropic deformation of 316L stainless steel overhang structures built by material extrusion based additive manufacturing”, Additive Manufacturing, Vol. 50, pp. 102545-102557.
[J47]. Jiang, D.Y., Shraida, H.A., and Ning, F.D.*, 2021, “Non-planar polymer-based flexible electronics fabricated by a four-axis additive manufacturing process”, Materials Letters, Vol. 294, pp. 129748-129752.
[J46]. Jiang, D.Y. and Ning, F.D.*, 2021, “Additive Manufacturing of 316L Stainless Steel by a Printing-Debinding-Sintering Method: Effects of Microstructure on Fatigue Property”, ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 143, No. 9, pp. 091007-091016.
[J45]. Wang, F.J., Zheng, J.Q., Wang, G.S., Jiang, D.Y., Ning, F.D.*, 2021, "A Novel Printing Strategy in Additive Manufacturing of Continuous Carbon Fiber Reinforced Plastic Composites," Manufacturing Letters, Vol. 27, pp. 72-77.
[J44]. Zhou, Y., Ning, F.D.*, Zhang, P., and Sharma, A., 2021, “Geometrical, Microstructural, and Mechanical Properties of Curved-surface AlSi10Mg Parts Fabricated by Powder Bed Fusion Additive Manufacturing," Materials & Design, Vol. 198, pp. 109360-109362.
[J43]. Wang, J.L., Liu Y., Zhang, X.T., Rahman, S.E., Su, S.H., Wei, J.H., Ning, F.D., Hu, Z.L., Zaguilán, R.M., Sennoune, S.R., Cong, W.L., Christopher, G., Zhang, K., and Qiu, J.J., 2021, "3D Printed Agar/ Calcium Alginate Hydrogels with High Shape Fidelity and Tailorable Mechanical Properties," Polymer, Vol. 214, pp. 123238-123246.
[J42]. Jiang, D.Y., Ning, F.D.*, and Wang, Y., 2021, “Additive Manufacturing of Biodegradable Iron-based Particle Reinforced Polylactic Acid Composite Scaffolds for Tissue Engineering,” Journal of Materials Processing Technology, Vol. 289, pp. 116952-116963.
[J41]. Wang, F.J., Wang, G.S., Ning, F.D.*, and Zhang, Z.B., 2021, “Fiber-matrix Impregnation Behavior during Additive Manufacturing of Continuous Carbon Fiber Reinforced Polylactic Acid Composites,” Additive Manufacturing, Vol. 37, pp. 101661-101672.
[J40]. Wang, F.J., Bi, G.J., and Ning, F.D., 2021, “Modeling of Dynamic Milling Forces Considering the Interlaminar Effect During Milling of Multidirectional Carbon Fiber Reinforced Polymer (CFRP) Laminate”, Journal of Reinforced Plastics and Composites, Vol.40, No. 11-12, pp. 437-449.
[J39]. Ning, F.D., Jiang, D.Y., Liu, Z.C., Wang, H., and Cong, W.L., 2021, “Ultrasonic Frequency Effects on the Melt Pool Formation, Porosity, and Thermal-dependent Property of Inconel 718 Fabricated by Ultrasonic Vibration-Assisted Directed Energy Deposition”, ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 143, No.5, pp. 051009-051018.
[J38]. Karimi, S., Kwon, S., and Ning, F.D., 2020, "Energy-Aware Production Scheduling for Additive Manufacturing," Journal of Cleaner Production, Vol. 278, pp. 123183-123193.
[J37]. Zhou, Y. and Ning, F.D.*, 2020, “Build Orientation Effects on Geometric Performance of Curved-Surface SS316L Parts Fabricated by Selective Laser Melting,” ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 142, No. 12, pp. 121002-121014.
[J36]. Ning, F.D. and Cong, W.L., 2020, “Ultrasonic vibration-assisted (UV-A) manufacturing processes: State of the art and future perspectives,” Journal of Manufacturing Processes, 51, pp.174-190.
[J35]. Wang, F.J., Zhang, Z.B., Ning, F.D.*, Wang, G.S., and Dong, C.H., 2020, “A Mechanistic Model for Tensile Property of Continuous Carbon Fiber Reinforced Plastic Composites Built by Fused Filament Fabrication,” Additive Manufacturing, 32, pp. 101102-101113.
[J34]. Wang, H., Hu, Y.B., Ning, F.D., and Cong, W.L., 2020, "Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: Effects of ultrasonic frequency on microstructural and mechanical properties," Journal of Materials Processing Technology, 276, pp. 116395-116405.
[J33]. Wang, J., Liu, Y., Su, S., Wei, J., Rahman, S.E., Ning, F.D., Christopher, G., Cong, W. and Qiu, J., 2019, “Ultrasensitive Wearable Strain Sensors of 3D Printing Tough and Conductive Hydrogels,” Polymers, 11(11), pp. 1873-1887.
[J32]. Wang, H., Ning, F.D., Li, Y., Hu, Y. and Cong, W., 2019, “Scratching-induced surface characteristics and material removal mechanisms in rotary ultrasonic surface machining of CFRP,” Ultrasonics, 97, pp.19-28. (One of the most downloaded articles in this journal)
[J31]. Ning, F.D., Wang, H. and Cong, W., 2019, “Rotary ultrasonic machining of carbon fiber reinforced plastic composites: a study on fiber material removal mechanism through single-grain scratching,” The International Journal of Advanced Manufacturing Technology, 103(1-4), pp.1095-1104.
[J30]. Liu, Z., Li, T., Ning, F.D., Cong, W., Kim, H., Jiang, Q. and Zhang, H., 2019, “Effects of deposition variables on molten pool temperature during laser engineered net shaping of Inconel 718 superalloy,” The International Journal of Advanced Manufacturing Technology, 102(1-4), pp.969-976.
[J29]. Li, Y.C., Ge, X., Wang, H., Hu, Y.B., Ning, F.D., Cong, W.L., and Ren, C.Z., 2019, “Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests,” Ceramics International, Vol. 45, No. 4, pp. 4729-4738.
[J28]. Li, Y.C., Ren, C.Z., Wang, H., Hu, Y.B., Ning, F.D., Wang, X.L., and Cong, W.L., 2019, “Edge surface grinding of CFRP composites using rotary ultrasonic machining: comparison of two machining methods,” International Journal of Advanced Manufacturing Technology, Vol. 100, No. 9-12, pp. 3237-3248.
[J27]. Liu, Z.C., Jiang, Q.H., Ning, F.D., Kim, H., Cong, W.L., Xu, C.X., and Zhang, H.C., 2018, “Investigation of energy requirements and environmental performance for additive manufacturing processes,” Sustainability, Vol. 10, pp. 3606-3620.
**************************************************** Before Binghamton University (below) ************************************************************
[J26]. Ning, F.D., Hu, Y.B., and Cong, W.L., 2018, “Microstructure and mechanical property of TiB reinforced Ti matrix composites fabricated by ultrasonic vibration-assisted laser engineered net shaping," Rapid Prototyping Journal, Doi: 10.1108/RPJ-05-2018-0118.
[J25]. Wang, H., Ning, F.D., Hu, Y.B., Li, Y.C., Wang, X.L., and Cong, W.L., 2018, “Edge trimming of carbon fiber-reinforced plastic composites using rotary ultrasonic machining: effects of tool orientations,” International Journal of Advanced Manufacturing Technology, Vol. 98, No. 5-8, pp. 1641-1653.
[J24]. Wang, X.L., Deng, D.W., Hu, Y.B., Ning, F.D., Wang, H., Cong, W.L., and Zhang, H.C., 2018, "Overhang structure and accuracy in laser engineered net shaping of Fe-Cr steel," Optics & Laser Technology, Vol. 106, pp. 357-365.
[J23]. Ning, F.D., Hu, Y.B., Liu, Z.C., Wang, X.L., Li, Y.Z., and Cong, W.L., 2018, “Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: microstructural and mechanical characterization,” ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 140, No. 6, pp. 061012-1–061012-11.
[J22]. Wang, H., Cong, W.L., Ning, F.D., and Hu, Y.B., 2018, “A study on effects of machining variables in surface grinding of CFRP composites using rotary ultrasonic machining,” International Journal of Advanced Manufacturing Technology, Vol. 95, No. 9-12, pp. 3651-3663.
[J21]. Hu, Y.B., Ning, F.D., Cong, W.L., Li, Y.C., Wang, X.L., and Wang, H., 2018, “Ultrasonic vibration-assisted laser engineering net shaping of ZrO2-Al2O3 bulk parts: effects on crack suppression, microstructure, and mechanical properties,” Ceramics International, Vol. 44, No. 3, pp. 2752-2760.
[J20]. Wang, H., Ning, F.D., Hu, Y.B., and Cong, W.L., 2018, “Surface grinding of CFRP composites using rotary ultrasonic machining: a comparison of workpiece machining orientations,” International Journal of Advanced Manufacturing Technology, Vol. 95, No. 5-8, pp. 2917-2930.
[J19]. Hu, Y.B., Cong W.L., Wang, X.L., Li, Y.C., Ning, F.D., and Wang, H., 2018, “Laser deposition-additive manufacturing of TiB-Ti composites with novel three-dimensional quasi-continuous network microstructure: Effects on strengthening and toughening,” Composites Part B: Engineering, Vol. 133, pp. 91-100.
[J18]. Hu, Y.B., Ning, F.D., Wang, H., Cong, W.L., and Zhao, B., 2018, “Laser engineered net shaping of quasi-continuous network microstructural TiB reinforced titanium matrix bulk composites: microstructure and wear performance,” Optics & Laser Technology, Vol. 99, pp. 174-183.
[J17]. Cong, W.L., and Ning, F.D., 2017, “A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping process,” International Journal of Machine Tools and Manufacture, Vol. 121, pp. 61-69.
[J16]. Hu, Y.B., Ning, F.D., Wang, X.L., Wang, H., Zhao, B., Cong, W.L., and Li, Y.Z., 2017, “Laser deposition-additive manufacturing of in-situ TiB reinforced titanium matrix composites: TiB growth and part performance,” International Journal of Advanced Manufacturing Technology, Vol. 93, No.(9-12), pp. 3409-3418.
[J15]. Hu, Y.B., Zhao, B., Ning, F.D., Wang, H., and Cong, W.L., 2017, “In-situ ultrafine three-dimensional quasi-continuous network microstructural TiB reinforced titanium matrix composites fabrication using laser engineered net shaping,” Materials Letters, Vol. 195, pp. 116-119.
[J14]. Ning, F.D., Cong, W.L., Wang, H., Hu, Y.B., Hu, Z.L., and Pei, Z.J., 2017, “Surface grinding of CFRP composites with rotary ultrasonic machining: a mechanistic model on infeed-directional cutting force,” International Journal of Advanced Manufacturing Technology, Vol. 92, No. 1, pp. 1217-1229.
[J13]. Ning, F.D., Wang, H., Cong, W.L., and Fernando, P.K.S.C., 2017, “A mechanistic ultrasonic vibration amplitude model during rotary ultrasonic machining of CFRP composites,” Ultrasonics, Vol. 76, pp. 44-51.
[J12]. Ning, F.D., Cong, W.L., Hu, Z.L., and Huang, K., 2017, “Additive manufacturing of thermoplastic matrix composites using fused deposition modeling: A comparison of two reinforcements,” Journal of Composite Materials, Vol. 51, No. 27, pp. 3733-3742.
[J11]. Wang, H., Ning, F.D., Hu, Y.B., Du, D.P., and Cong, W.L., 2017, “Surface grinding of CFRP composites using rotary ultrasonic machining: design of experiment on cutting force, torque, and surface roughness,” International Journal of Manufacturing Research, Vol. 12, No. 4, pp. 461-479.
[J10]. Liu, Z.C., Ning, F.D., Cong, W.L., Jiang, Q.H., Zhang, H.C., and Zhou, Y.G., 2016, “Energy consumption and saving analysis for laser engineered net shaping of metal powders,” Energies, Vol. 9, No. 10, pp. 763-774.
[J9]. Ning, F.D., and Cong, W.L., 2016, “Microstructures and mechanical properties of Fe-Cr stainless steel parts fabricated by ultrasonic vibration-assisted laser engineered net shaping process,” Materials Letters, Vol. 179, pp. 61-64.
[J8]. Li, Y.Z., Ning, F.D., Cong, W.L., Zhang, M., and Tang, Y.J., 2016, “Investigating pellet charring and temperature in ultrasonic vibration-assisted pelleting of wheat straw for cellulosic biofuel manufacturing,” Renewable Energy, Vol. 92, pp. 312-320.
[J7]. Ning, F.D., Cong, W.L., Pei, Z.J., and Treadwell, C., 2016, “Rotary ultrasonic machining of CFRP: A comparison with grinding,” Ultrasonics, Vol. 66, pp. 125-132. (The most cited articles in this journal)
[J6]. Wang, H., Ning, F.D., Hu, Y.B., Fernando, P.K.S.C., Pei, Z.J., and Cong, W.L., 2016, “Surface grinding of CFRP composites using rotary ultrasonic machining: effects of tool variables,” Advances in Mechanical Engineering, Vol. 8, No. 9, pp. 1-14.
[J5]. Ning, F.D., Cong, W.L., Hu, Y.B., and Wang, H., 2016, “Additive manufacturing of CFRP composites using fused deposition modeling: Effects of process parameters on tensile properties,” Journal of Composite Materials, Vol. 51, No. 4, pp. 451-462. (The most cited & read article in this journal)
[J4]. Wei, J.H., Wang, J.L., Su, S.H., Wang, S.R., Qiu, J.J., Zhang, Z.H., Christopher, G., Ning, F.D., and Cong, W.L., 2015, “3D printing of an extremely tough hydrogel,” RSC Advances, Vol. 5, No. 99, pp. 81324-81329.
[J3]. Ning, F.D., Cong, W.L., Qiu, J.J., Wei, J.J., and Wang, S.R., 2015, “Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling,” Composites Part B: Engineering, Vol. 80, pp. 369-378. (One of the most cited & downloaded articles in this journal)
[J2]. Ning, F.D., Wang, F.J., Jia, Z.Y., and Ma, J.W., 2014, “Chip morphology and surface roughness in high-speed milling of nickel-based superalloy Inconel 718,” International Journal of Machining and Machinability of Materials, Vol. 15, No. 3-4, pp. 285-299.
[J1]. Ma, J.W., Jia, Z.Y., Wang, F.J., and Ning, F.D., 2014, “Spindle speed selection for high-speed milling of titanium alloy curved surface,” Materials and Manufacturing Processes, Vol. 29, No. 3, pp. 364-369.
Book Chapter (1):
[B1]. Cong, W.L., and Ning, F.D., 2015, Chapter 2 Rotary Ultrasonic Machining of CFRP Composites, in Machinability of Fibre-Reinforced Plastics, pp. 31-81, J. P. Davim (Ed.). Walter de Gruyter GmbH & Co KG.
Peer-reviewed Conference Proceedings (25):
[C25]. Wittkopf, J.A., Jhaveri, S., Fei, F., Mrinal, M., Luna-Ramirez, E., Richmond, D., Jiang, D., Ning, F., Alhendi, M., Smilgies, D. and Poliks, M.D., 2023, 3D Printed Electronics with Multi Jet Fusion for Flexible Hybrid Electronics. IEEE 73rd Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, 2023, pp. 1463-1470.
[C24]. Zhou, Y., and Ning, F.D.*, 2023, “Directed Energy Deposition of SS 316L/SiC Composites Using Coincident and Coaxial Wire-Powder Feeding,” Manufacturing Letters, (NAMRC Conference Proceeding)
[C23]. Chen, Y., Zhou, Y., Abbara, E., Alhendi, M., Poliks, M.D., Ning, F.D. and Zhou, Y., 2023, “3D Printing of Poly(ethylene oxide) or Electrospun Polystyrene Microtube Embedded Sodium Alginate and Carboxymethyl Cellulose Hydrogel,” Manufacturing Letters, (NAMRC Conference Proceeding)
[C22]. Jiang, D.Y. and Ning, F.D.*, 2022, “Material Extrusion of Stainless-steel Plate-lattice Structure: Part Shrinkage, Microstructure, and Mechanical Performance,” Manufacturing Letters, Vol. 33, Supplement, pp. 712-718. (NAMRC conference proceeding)
[C21]. Zhou, Y., and Ning, F.D.*, 2022, “A Feasibility Study on Directed Energy Deposition of SS 316L with Coaxial Wire-powder Feeding,” Manufacturing Letters, Vol. 33, Supplement, pp. 686-691. (NAMRC conference proceeding)
[C20]. Jiang, D.Y. and Ning, F.D.*, 2020, “Fused Filament Fabrication of Biodegradable PLA/316L Composite Scaffolds: Effects of Metal Particle Content,” Procedia Manufacturing, Vol. 48, pp. 755-762.
[C19]. Zhou, Y., and Ning, F.D.*, 2020, “Effects of Build Orientation on Mechanical Properties of Curved-Surface AlSi10Mg Alloy Fabricated by Powder Bed Fusion Additive Manufacturing,” Proceedings of the ASME 2020 15th International Manufacturing Science and Engineering Conference (MSEC2020), June 22-26, 2020, Cincinnati, OH, USA.
[C18]. Alelaumi, S., Zhou, Y., Khoshkhoo, A., and Ning, F.D.*, 2019, "Selective Laser Melting of Curved Surface Metal Parts: A Fundamental Study on Surface Finish and Dimensional Accuracy," Proceedings of the ASME 2019 International Manufacturing Science and Engineering Conference (MSEC2019-2996), June 10–14, 2019, Erie, PA, USA.
***************************************************** Before Binghamton University (below) ***********************************************************
[C17]. Wang, H., Ning, F.D., Hu, Y.B., Li, Y.C., Wang, X.L., and Cong, W.L., 2018, “Edge trimming of CFRP composites using rotary ultrasonic machining: effects of ultrasonic vibration,” Proceedings of the ASME 2018 International Manufacturing Science and Engineering Conference (MSEC2018-6362), June 18-22, 2018, College Station, TX, USA.
[C16]. Hu, Y.B., Wang, H., Li, Y.C., Ning, F.D., and Cong, W.L., 2018, “Surface grinding of ZTA parts fabricated by laser engineered net shaping process: effects of ZrO2 content and ultrasonic vibration,” Proceedings of the ASME 2018 International Manufacturing Science and Engineering Conference (MSEC2018-6663), June 18-22, 2018, College Station, TX, USA.
[C15]. Ning, F.D., Hu, Y.B., Liu, Z.C., Cong, W.L., Li, Y.Z., and Wang, X.L., 2017, “Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: a feasibility study,” Procedia Manufacturing, Vol. 10, pp. 771-778.
[C14]. Ning, F.D., Wang, H., Hu, Y.B., Cong, W.L., Zhang, M., and Li, Y.Z., 2017, “Rotary ultrasonic surface machining of CFRP composites: a comparison with conventional surface grinding,” Procedia Manufacturing, Vol. 10, pp. 557-567.
[C13]. Liu, Z.C., Cong, W.L., Kim, H., Ning, F.D., Jiang, Q.H., Li, T., Zhang, H.C., and Zhou, Y.G., 2017, “Feasibility exploration of superalloys for AISI 4140 steel repair using laser engineered net shaping,” Procedia Manufacturing, Vol. 10, pp. 912-922.
[C12]. Hu, Y.B., Wang, H., Ning, F.D., Cong, W.L., and Li, Y.Z., 2017, “Surface grinding of optical BK7/K9 glass using rotary ultrasonic machining: an experimental study,” Proceedings of the ASME 2017 International Manufacturing Science and Engineering Conference (MSEC2017-2780), June 4-8, 2017, Los Angeles, CA, USA.
[C11]. Wang, H., Hu, Y.B., Ning, F.D., Li, Y.Z., Zhang, M., Cong, W.L., and Smallwood, S., 2017, “Surface grinding of CFRP composites using rotary ultrasonic machining: effects of ultrasonic power,” Proceedings of the ASME 2017 International Manufacturing Science and Engineering Conference (MSEC2017-2726), June 4-8, 2017, Los Angeles, CA, USA.
[C10]. Ning, F.D., Hu, Y.B., Liu, Z.C., and Cong, W.L., 2016, “Microstructural and mechanical performance of Al2O3 nanoparticle reinforced 17-4 PH stainless steel bulk composite parts fabricated by laser engineered net shaping process,” 2016 Annual International Solid Freeform Fabrication Symposium, August 8-10, Austin, Texas, USA.
[C9]. Liu, Z.C., Ning, F.D., Cong, W.L., and Zhang, H.C., 2016, “Laser engineering net shaping (LENS) of metal powders: a study on energy consumption,” 2016 Annual International Solid Freeform Fabrication Symposium, August 8 – 10, Austin, Texas, USA.
[C8]. Hu, Y.B., Wang, H., Ning, F.D., and Cong, W.L., 2016, “Compressive property comparisons between laser engineered net shaping of in situ TiB-Ti composites and CP-Ti materials,” 2016 Annual International Solid Freeform Fabrication Symposium, August 8 – 10, Austin, Texas, USA.
[C7]. Ning, F.D., Cong, W.L., Jia, Z.Y., Wang, F.J., and Zhang, M., 2016, “Additive manufacturing of CFRP composites using fused deposition modeling: effects of process parameters,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference (MSEC2016-8561), June 27 - July 01, 2016, Blacksburg, Virginia, USA.
[C6]. Hu, Y.B., Wang, H., Ning, F.D., and Cong, W.L., 2016, “Laser engineered net shaping of commercially pure titanium: effects of fabricating variables,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference (MSEC2016-8812), June 27 - July 01, 2016, Blacksburg, Virginia, USA.
[C5]. Li, Y.Z., Cong, W.L., Huang, R.X., and Ning, F.D., 2016, “Laser cladding of alumina material coating: effects on deposition quality,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference (MSEC2016-8814), June 27 - July 01, 2016, Blacksburg, Virginia, USA.
[C4]. Zhang, M., Song, X.X., Grove, W., Hull, E., Pei, Z.J., Ning, F.D., and Cong, W.L., 2016, “Carbon nanotube reinforced fused deposition modeling using microwave irradiation,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference (MSEC2016-8790), June 27 - July 01, 2016, Blacksburg, Virginia, USA.
[C3]. Ning, F.D., Cong, W.L., Wei, J.H., Wang, S.R., and Zhang, M., 2015, “Additive manufacturing of CFRP composites using fused deposition modeling: effects of carbon fiber content and length,” Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference (MSEC2015-9436), June 8-12, 2015, Charlotte, North Carolina, USA.
[C2]. Ning, F.D., and Cong, W.L., 2015, “Rotary ultrasonic machining of CFRP: design of experiment with a cutting force model,” Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference (MSEC2015-9227), June 8-12, 2015, Charlotte, North Carolina, USA.
[C1]. Ning, F.D., Wang, F.J., and Ma, J.W., 2014, “A new modeling method for cutting forces in side milling of aluminum alloy,” Proceedings of 2014 International Conference on Mechanical Design, Manufacture and Automation Engineering (MDMAE2014), pp. 420-424, January 11-12, 2014, Phuket, Thailand.
Journal Articles (58):
[J58]. Wang, F.J., You, S.Y., Jiang, D.Y., Yuan, X.Y., Fu, R., and Ning, F.D.*, 2023. Microstructure Evolution, Phase Formation, Corrosion, and Mechanical Properties of Stainless Steel Fabricated by Extrusion-Based Sintering-Assisted Additive Manufacturing, Additive Manufacturing, Vol. 75, pp.103746-103759.
[J57]. You, S.Y., Jiang, D.Y., Wang, F.J. and Ning, F.D.*, 2023. Anisotropic sintering shrinkage behavior of stainless steel fabricated by extrusion-based metal additive manufacturing, Journal of Manufacturing Processes, Vol. 101, pp.1508-1520.
[J56]. Jiang, D.Y. and Ning, F.D.*, 2023. Bi-metal structures fabricated by extrusion-based sintering-assisted additive manufacturing, Journal of Manufacturing Processes, Vol. 98, pp.216-222. (Fast-tracked Paper from NAMRC2023).
[J55]. Zhou, Y. and Ning, F.D.*, 2023. Directed Energy Deposition with Coaxial Wire-Powder Feeding: Melt Pool Temperature and Microstructure. ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 145, pp.081004-1 - 081004-12.
[J54]. Foroughi, A.H., Valeri, C., Jiang, D., Ning, F.D., Razavi, M. and Razavi, M.J., 2023. Understanding compressive viscoelastic properties of additively manufactured PLA for bone-mimetic scaffold design. Medical Engineering & Physics, Vol. 114, pp.103972-103985.
[J53]. Zhou, Y., Zhang, P., Ning, F.D.*, 2023. Joining of carbon fiber reinforced polymer/titanium stacks using directed energy deposition additive manufacturing. Composite Structures, Vol. 310, pp. 116775-116789.
[J52]. Zhou, Y. and Ning, F.D.*, 2022. Joining CFRP/Ti stacks by directed energy deposition: Surface topography effects on interface formation and bonding. Composites Part B: Engineering, Vol. 247, pp. 110365-110377.
[J51]. Jiang, D.Y. and Ning, F.D.*, 2022. Physical-Mechanical Behaviors of Stainless Steel Plate-Lattice Built by Material Extrusion Additive Manufacturing. Journal of Materials Processing Technology, Vol. 309, pp. 117739-117748.
[J50]. Wang, F.J., You, S.Y., Jiang, D.Y., and Ning, F.D.*, 2022. Study on sintering mechanism for extrusion-based additive manufacturing of stainless steel through molecular dynamics simulation. Additive Manufacturing, Vol. 58, pp. 102991-103003.
[J49]. Zhou, Y., Abbara, E.M., Jiang, D.Y., Azizi, A., Poliks, M.D. and Ning, F.D.*, 2022. High-cycle fatigue properties of curved-surface AlSi10Mg parts fabricated by powder bed fusion additive manufacturing. Rapid Prototyping Journal, Vol. 28, No. 7, pp. 1346-1360.
[J48]. Jiang, D.Y. and Ning, F.D.*, 2022, “Anisotropic deformation of 316L stainless steel overhang structures built by material extrusion based additive manufacturing”, Additive Manufacturing, Vol. 50, pp. 102545-102557.
[J47]. Jiang, D.Y., Shraida, H.A., and Ning, F.D.*, 2021, “Non-planar polymer-based flexible electronics fabricated by a four-axis additive manufacturing process”, Materials Letters, Vol. 294, pp. 129748-129752.
[J46]. Jiang, D.Y. and Ning, F.D.*, 2021, “Additive Manufacturing of 316L Stainless Steel by a Printing-Debinding-Sintering Method: Effects of Microstructure on Fatigue Property”, ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 143, No. 9, pp. 091007-091016.
[J45]. Wang, F.J., Zheng, J.Q., Wang, G.S., Jiang, D.Y., Ning, F.D.*, 2021, "A Novel Printing Strategy in Additive Manufacturing of Continuous Carbon Fiber Reinforced Plastic Composites," Manufacturing Letters, Vol. 27, pp. 72-77.
[J44]. Zhou, Y., Ning, F.D.*, Zhang, P., and Sharma, A., 2021, “Geometrical, Microstructural, and Mechanical Properties of Curved-surface AlSi10Mg Parts Fabricated by Powder Bed Fusion Additive Manufacturing," Materials & Design, Vol. 198, pp. 109360-109362.
[J43]. Wang, J.L., Liu Y., Zhang, X.T., Rahman, S.E., Su, S.H., Wei, J.H., Ning, F.D., Hu, Z.L., Zaguilán, R.M., Sennoune, S.R., Cong, W.L., Christopher, G., Zhang, K., and Qiu, J.J., 2021, "3D Printed Agar/ Calcium Alginate Hydrogels with High Shape Fidelity and Tailorable Mechanical Properties," Polymer, Vol. 214, pp. 123238-123246.
[J42]. Jiang, D.Y., Ning, F.D.*, and Wang, Y., 2021, “Additive Manufacturing of Biodegradable Iron-based Particle Reinforced Polylactic Acid Composite Scaffolds for Tissue Engineering,” Journal of Materials Processing Technology, Vol. 289, pp. 116952-116963.
[J41]. Wang, F.J., Wang, G.S., Ning, F.D.*, and Zhang, Z.B., 2021, “Fiber-matrix Impregnation Behavior during Additive Manufacturing of Continuous Carbon Fiber Reinforced Polylactic Acid Composites,” Additive Manufacturing, Vol. 37, pp. 101661-101672.
[J40]. Wang, F.J., Bi, G.J., and Ning, F.D., 2021, “Modeling of Dynamic Milling Forces Considering the Interlaminar Effect During Milling of Multidirectional Carbon Fiber Reinforced Polymer (CFRP) Laminate”, Journal of Reinforced Plastics and Composites, Vol.40, No. 11-12, pp. 437-449.
[J39]. Ning, F.D., Jiang, D.Y., Liu, Z.C., Wang, H., and Cong, W.L., 2021, “Ultrasonic Frequency Effects on the Melt Pool Formation, Porosity, and Thermal-dependent Property of Inconel 718 Fabricated by Ultrasonic Vibration-Assisted Directed Energy Deposition”, ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 143, No.5, pp. 051009-051018.
[J38]. Karimi, S., Kwon, S., and Ning, F.D., 2020, "Energy-Aware Production Scheduling for Additive Manufacturing," Journal of Cleaner Production, Vol. 278, pp. 123183-123193.
[J37]. Zhou, Y. and Ning, F.D.*, 2020, “Build Orientation Effects on Geometric Performance of Curved-Surface SS316L Parts Fabricated by Selective Laser Melting,” ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 142, No. 12, pp. 121002-121014.
[J36]. Ning, F.D. and Cong, W.L., 2020, “Ultrasonic vibration-assisted (UV-A) manufacturing processes: State of the art and future perspectives,” Journal of Manufacturing Processes, 51, pp.174-190.
[J35]. Wang, F.J., Zhang, Z.B., Ning, F.D.*, Wang, G.S., and Dong, C.H., 2020, “A Mechanistic Model for Tensile Property of Continuous Carbon Fiber Reinforced Plastic Composites Built by Fused Filament Fabrication,” Additive Manufacturing, 32, pp. 101102-101113.
[J34]. Wang, H., Hu, Y.B., Ning, F.D., and Cong, W.L., 2020, "Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: Effects of ultrasonic frequency on microstructural and mechanical properties," Journal of Materials Processing Technology, 276, pp. 116395-116405.
[J33]. Wang, J., Liu, Y., Su, S., Wei, J., Rahman, S.E., Ning, F.D., Christopher, G., Cong, W. and Qiu, J., 2019, “Ultrasensitive Wearable Strain Sensors of 3D Printing Tough and Conductive Hydrogels,” Polymers, 11(11), pp. 1873-1887.
[J32]. Wang, H., Ning, F.D., Li, Y., Hu, Y. and Cong, W., 2019, “Scratching-induced surface characteristics and material removal mechanisms in rotary ultrasonic surface machining of CFRP,” Ultrasonics, 97, pp.19-28. (One of the most downloaded articles in this journal)
[J31]. Ning, F.D., Wang, H. and Cong, W., 2019, “Rotary ultrasonic machining of carbon fiber reinforced plastic composites: a study on fiber material removal mechanism through single-grain scratching,” The International Journal of Advanced Manufacturing Technology, 103(1-4), pp.1095-1104.
[J30]. Liu, Z., Li, T., Ning, F.D., Cong, W., Kim, H., Jiang, Q. and Zhang, H., 2019, “Effects of deposition variables on molten pool temperature during laser engineered net shaping of Inconel 718 superalloy,” The International Journal of Advanced Manufacturing Technology, 102(1-4), pp.969-976.
[J29]. Li, Y.C., Ge, X., Wang, H., Hu, Y.B., Ning, F.D., Cong, W.L., and Ren, C.Z., 2019, “Study of material removal mechanisms in grinding of C/SiC composites via single-abrasive scratch tests,” Ceramics International, Vol. 45, No. 4, pp. 4729-4738.
[J28]. Li, Y.C., Ren, C.Z., Wang, H., Hu, Y.B., Ning, F.D., Wang, X.L., and Cong, W.L., 2019, “Edge surface grinding of CFRP composites using rotary ultrasonic machining: comparison of two machining methods,” International Journal of Advanced Manufacturing Technology, Vol. 100, No. 9-12, pp. 3237-3248.
[J27]. Liu, Z.C., Jiang, Q.H., Ning, F.D., Kim, H., Cong, W.L., Xu, C.X., and Zhang, H.C., 2018, “Investigation of energy requirements and environmental performance for additive manufacturing processes,” Sustainability, Vol. 10, pp. 3606-3620.
**************************************************** Before Binghamton University (below) ************************************************************
[J26]. Ning, F.D., Hu, Y.B., and Cong, W.L., 2018, “Microstructure and mechanical property of TiB reinforced Ti matrix composites fabricated by ultrasonic vibration-assisted laser engineered net shaping," Rapid Prototyping Journal, Doi: 10.1108/RPJ-05-2018-0118.
[J25]. Wang, H., Ning, F.D., Hu, Y.B., Li, Y.C., Wang, X.L., and Cong, W.L., 2018, “Edge trimming of carbon fiber-reinforced plastic composites using rotary ultrasonic machining: effects of tool orientations,” International Journal of Advanced Manufacturing Technology, Vol. 98, No. 5-8, pp. 1641-1653.
[J24]. Wang, X.L., Deng, D.W., Hu, Y.B., Ning, F.D., Wang, H., Cong, W.L., and Zhang, H.C., 2018, "Overhang structure and accuracy in laser engineered net shaping of Fe-Cr steel," Optics & Laser Technology, Vol. 106, pp. 357-365.
[J23]. Ning, F.D., Hu, Y.B., Liu, Z.C., Wang, X.L., Li, Y.Z., and Cong, W.L., 2018, “Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: microstructural and mechanical characterization,” ASME Transaction - Journal of Manufacturing Science and Engineering, Vol. 140, No. 6, pp. 061012-1–061012-11.
[J22]. Wang, H., Cong, W.L., Ning, F.D., and Hu, Y.B., 2018, “A study on effects of machining variables in surface grinding of CFRP composites using rotary ultrasonic machining,” International Journal of Advanced Manufacturing Technology, Vol. 95, No. 9-12, pp. 3651-3663.
[J21]. Hu, Y.B., Ning, F.D., Cong, W.L., Li, Y.C., Wang, X.L., and Wang, H., 2018, “Ultrasonic vibration-assisted laser engineering net shaping of ZrO2-Al2O3 bulk parts: effects on crack suppression, microstructure, and mechanical properties,” Ceramics International, Vol. 44, No. 3, pp. 2752-2760.
[J20]. Wang, H., Ning, F.D., Hu, Y.B., and Cong, W.L., 2018, “Surface grinding of CFRP composites using rotary ultrasonic machining: a comparison of workpiece machining orientations,” International Journal of Advanced Manufacturing Technology, Vol. 95, No. 5-8, pp. 2917-2930.
[J19]. Hu, Y.B., Cong W.L., Wang, X.L., Li, Y.C., Ning, F.D., and Wang, H., 2018, “Laser deposition-additive manufacturing of TiB-Ti composites with novel three-dimensional quasi-continuous network microstructure: Effects on strengthening and toughening,” Composites Part B: Engineering, Vol. 133, pp. 91-100.
[J18]. Hu, Y.B., Ning, F.D., Wang, H., Cong, W.L., and Zhao, B., 2018, “Laser engineered net shaping of quasi-continuous network microstructural TiB reinforced titanium matrix bulk composites: microstructure and wear performance,” Optics & Laser Technology, Vol. 99, pp. 174-183.
[J17]. Cong, W.L., and Ning, F.D., 2017, “A fundamental investigation on ultrasonic vibration-assisted laser engineered net shaping process,” International Journal of Machine Tools and Manufacture, Vol. 121, pp. 61-69.
[J16]. Hu, Y.B., Ning, F.D., Wang, X.L., Wang, H., Zhao, B., Cong, W.L., and Li, Y.Z., 2017, “Laser deposition-additive manufacturing of in-situ TiB reinforced titanium matrix composites: TiB growth and part performance,” International Journal of Advanced Manufacturing Technology, Vol. 93, No.(9-12), pp. 3409-3418.
[J15]. Hu, Y.B., Zhao, B., Ning, F.D., Wang, H., and Cong, W.L., 2017, “In-situ ultrafine three-dimensional quasi-continuous network microstructural TiB reinforced titanium matrix composites fabrication using laser engineered net shaping,” Materials Letters, Vol. 195, pp. 116-119.
[J14]. Ning, F.D., Cong, W.L., Wang, H., Hu, Y.B., Hu, Z.L., and Pei, Z.J., 2017, “Surface grinding of CFRP composites with rotary ultrasonic machining: a mechanistic model on infeed-directional cutting force,” International Journal of Advanced Manufacturing Technology, Vol. 92, No. 1, pp. 1217-1229.
[J13]. Ning, F.D., Wang, H., Cong, W.L., and Fernando, P.K.S.C., 2017, “A mechanistic ultrasonic vibration amplitude model during rotary ultrasonic machining of CFRP composites,” Ultrasonics, Vol. 76, pp. 44-51.
[J12]. Ning, F.D., Cong, W.L., Hu, Z.L., and Huang, K., 2017, “Additive manufacturing of thermoplastic matrix composites using fused deposition modeling: A comparison of two reinforcements,” Journal of Composite Materials, Vol. 51, No. 27, pp. 3733-3742.
[J11]. Wang, H., Ning, F.D., Hu, Y.B., Du, D.P., and Cong, W.L., 2017, “Surface grinding of CFRP composites using rotary ultrasonic machining: design of experiment on cutting force, torque, and surface roughness,” International Journal of Manufacturing Research, Vol. 12, No. 4, pp. 461-479.
[J10]. Liu, Z.C., Ning, F.D., Cong, W.L., Jiang, Q.H., Zhang, H.C., and Zhou, Y.G., 2016, “Energy consumption and saving analysis for laser engineered net shaping of metal powders,” Energies, Vol. 9, No. 10, pp. 763-774.
[J9]. Ning, F.D., and Cong, W.L., 2016, “Microstructures and mechanical properties of Fe-Cr stainless steel parts fabricated by ultrasonic vibration-assisted laser engineered net shaping process,” Materials Letters, Vol. 179, pp. 61-64.
[J8]. Li, Y.Z., Ning, F.D., Cong, W.L., Zhang, M., and Tang, Y.J., 2016, “Investigating pellet charring and temperature in ultrasonic vibration-assisted pelleting of wheat straw for cellulosic biofuel manufacturing,” Renewable Energy, Vol. 92, pp. 312-320.
[J7]. Ning, F.D., Cong, W.L., Pei, Z.J., and Treadwell, C., 2016, “Rotary ultrasonic machining of CFRP: A comparison with grinding,” Ultrasonics, Vol. 66, pp. 125-132. (The most cited articles in this journal)
[J6]. Wang, H., Ning, F.D., Hu, Y.B., Fernando, P.K.S.C., Pei, Z.J., and Cong, W.L., 2016, “Surface grinding of CFRP composites using rotary ultrasonic machining: effects of tool variables,” Advances in Mechanical Engineering, Vol. 8, No. 9, pp. 1-14.
[J5]. Ning, F.D., Cong, W.L., Hu, Y.B., and Wang, H., 2016, “Additive manufacturing of CFRP composites using fused deposition modeling: Effects of process parameters on tensile properties,” Journal of Composite Materials, Vol. 51, No. 4, pp. 451-462. (The most cited & read article in this journal)
[J4]. Wei, J.H., Wang, J.L., Su, S.H., Wang, S.R., Qiu, J.J., Zhang, Z.H., Christopher, G., Ning, F.D., and Cong, W.L., 2015, “3D printing of an extremely tough hydrogel,” RSC Advances, Vol. 5, No. 99, pp. 81324-81329.
[J3]. Ning, F.D., Cong, W.L., Qiu, J.J., Wei, J.J., and Wang, S.R., 2015, “Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling,” Composites Part B: Engineering, Vol. 80, pp. 369-378. (One of the most cited & downloaded articles in this journal)
[J2]. Ning, F.D., Wang, F.J., Jia, Z.Y., and Ma, J.W., 2014, “Chip morphology and surface roughness in high-speed milling of nickel-based superalloy Inconel 718,” International Journal of Machining and Machinability of Materials, Vol. 15, No. 3-4, pp. 285-299.
[J1]. Ma, J.W., Jia, Z.Y., Wang, F.J., and Ning, F.D., 2014, “Spindle speed selection for high-speed milling of titanium alloy curved surface,” Materials and Manufacturing Processes, Vol. 29, No. 3, pp. 364-369.
Book Chapter (1):
[B1]. Cong, W.L., and Ning, F.D., 2015, Chapter 2 Rotary Ultrasonic Machining of CFRP Composites, in Machinability of Fibre-Reinforced Plastics, pp. 31-81, J. P. Davim (Ed.). Walter de Gruyter GmbH & Co KG.
Peer-reviewed Conference Proceedings (25):
[C25]. Wittkopf, J.A., Jhaveri, S., Fei, F., Mrinal, M., Luna-Ramirez, E., Richmond, D., Jiang, D., Ning, F., Alhendi, M., Smilgies, D. and Poliks, M.D., 2023, 3D Printed Electronics with Multi Jet Fusion for Flexible Hybrid Electronics. IEEE 73rd Electronic Components and Technology Conference (ECTC), Orlando, FL, USA, 2023, pp. 1463-1470.
[C24]. Zhou, Y., and Ning, F.D.*, 2023, “Directed Energy Deposition of SS 316L/SiC Composites Using Coincident and Coaxial Wire-Powder Feeding,” Manufacturing Letters, (NAMRC Conference Proceeding)
[C23]. Chen, Y., Zhou, Y., Abbara, E., Alhendi, M., Poliks, M.D., Ning, F.D. and Zhou, Y., 2023, “3D Printing of Poly(ethylene oxide) or Electrospun Polystyrene Microtube Embedded Sodium Alginate and Carboxymethyl Cellulose Hydrogel,” Manufacturing Letters, (NAMRC Conference Proceeding)
[C22]. Jiang, D.Y. and Ning, F.D.*, 2022, “Material Extrusion of Stainless-steel Plate-lattice Structure: Part Shrinkage, Microstructure, and Mechanical Performance,” Manufacturing Letters, Vol. 33, Supplement, pp. 712-718. (NAMRC conference proceeding)
[C21]. Zhou, Y., and Ning, F.D.*, 2022, “A Feasibility Study on Directed Energy Deposition of SS 316L with Coaxial Wire-powder Feeding,” Manufacturing Letters, Vol. 33, Supplement, pp. 686-691. (NAMRC conference proceeding)
[C20]. Jiang, D.Y. and Ning, F.D.*, 2020, “Fused Filament Fabrication of Biodegradable PLA/316L Composite Scaffolds: Effects of Metal Particle Content,” Procedia Manufacturing, Vol. 48, pp. 755-762.
[C19]. Zhou, Y., and Ning, F.D.*, 2020, “Effects of Build Orientation on Mechanical Properties of Curved-Surface AlSi10Mg Alloy Fabricated by Powder Bed Fusion Additive Manufacturing,” Proceedings of the ASME 2020 15th International Manufacturing Science and Engineering Conference (MSEC2020), June 22-26, 2020, Cincinnati, OH, USA.
[C18]. Alelaumi, S., Zhou, Y., Khoshkhoo, A., and Ning, F.D.*, 2019, "Selective Laser Melting of Curved Surface Metal Parts: A Fundamental Study on Surface Finish and Dimensional Accuracy," Proceedings of the ASME 2019 International Manufacturing Science and Engineering Conference (MSEC2019-2996), June 10–14, 2019, Erie, PA, USA.
***************************************************** Before Binghamton University (below) ***********************************************************
[C17]. Wang, H., Ning, F.D., Hu, Y.B., Li, Y.C., Wang, X.L., and Cong, W.L., 2018, “Edge trimming of CFRP composites using rotary ultrasonic machining: effects of ultrasonic vibration,” Proceedings of the ASME 2018 International Manufacturing Science and Engineering Conference (MSEC2018-6362), June 18-22, 2018, College Station, TX, USA.
[C16]. Hu, Y.B., Wang, H., Li, Y.C., Ning, F.D., and Cong, W.L., 2018, “Surface grinding of ZTA parts fabricated by laser engineered net shaping process: effects of ZrO2 content and ultrasonic vibration,” Proceedings of the ASME 2018 International Manufacturing Science and Engineering Conference (MSEC2018-6663), June 18-22, 2018, College Station, TX, USA.
[C15]. Ning, F.D., Hu, Y.B., Liu, Z.C., Cong, W.L., Li, Y.Z., and Wang, X.L., 2017, “Ultrasonic vibration-assisted laser engineered net shaping of Inconel 718 parts: a feasibility study,” Procedia Manufacturing, Vol. 10, pp. 771-778.
[C14]. Ning, F.D., Wang, H., Hu, Y.B., Cong, W.L., Zhang, M., and Li, Y.Z., 2017, “Rotary ultrasonic surface machining of CFRP composites: a comparison with conventional surface grinding,” Procedia Manufacturing, Vol. 10, pp. 557-567.
[C13]. Liu, Z.C., Cong, W.L., Kim, H., Ning, F.D., Jiang, Q.H., Li, T., Zhang, H.C., and Zhou, Y.G., 2017, “Feasibility exploration of superalloys for AISI 4140 steel repair using laser engineered net shaping,” Procedia Manufacturing, Vol. 10, pp. 912-922.
[C12]. Hu, Y.B., Wang, H., Ning, F.D., Cong, W.L., and Li, Y.Z., 2017, “Surface grinding of optical BK7/K9 glass using rotary ultrasonic machining: an experimental study,” Proceedings of the ASME 2017 International Manufacturing Science and Engineering Conference (MSEC2017-2780), June 4-8, 2017, Los Angeles, CA, USA.
[C11]. Wang, H., Hu, Y.B., Ning, F.D., Li, Y.Z., Zhang, M., Cong, W.L., and Smallwood, S., 2017, “Surface grinding of CFRP composites using rotary ultrasonic machining: effects of ultrasonic power,” Proceedings of the ASME 2017 International Manufacturing Science and Engineering Conference (MSEC2017-2726), June 4-8, 2017, Los Angeles, CA, USA.
[C10]. Ning, F.D., Hu, Y.B., Liu, Z.C., and Cong, W.L., 2016, “Microstructural and mechanical performance of Al2O3 nanoparticle reinforced 17-4 PH stainless steel bulk composite parts fabricated by laser engineered net shaping process,” 2016 Annual International Solid Freeform Fabrication Symposium, August 8-10, Austin, Texas, USA.
[C9]. Liu, Z.C., Ning, F.D., Cong, W.L., and Zhang, H.C., 2016, “Laser engineering net shaping (LENS) of metal powders: a study on energy consumption,” 2016 Annual International Solid Freeform Fabrication Symposium, August 8 – 10, Austin, Texas, USA.
[C8]. Hu, Y.B., Wang, H., Ning, F.D., and Cong, W.L., 2016, “Compressive property comparisons between laser engineered net shaping of in situ TiB-Ti composites and CP-Ti materials,” 2016 Annual International Solid Freeform Fabrication Symposium, August 8 – 10, Austin, Texas, USA.
[C7]. Ning, F.D., Cong, W.L., Jia, Z.Y., Wang, F.J., and Zhang, M., 2016, “Additive manufacturing of CFRP composites using fused deposition modeling: effects of process parameters,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference (MSEC2016-8561), June 27 - July 01, 2016, Blacksburg, Virginia, USA.
[C6]. Hu, Y.B., Wang, H., Ning, F.D., and Cong, W.L., 2016, “Laser engineered net shaping of commercially pure titanium: effects of fabricating variables,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference (MSEC2016-8812), June 27 - July 01, 2016, Blacksburg, Virginia, USA.
[C5]. Li, Y.Z., Cong, W.L., Huang, R.X., and Ning, F.D., 2016, “Laser cladding of alumina material coating: effects on deposition quality,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference (MSEC2016-8814), June 27 - July 01, 2016, Blacksburg, Virginia, USA.
[C4]. Zhang, M., Song, X.X., Grove, W., Hull, E., Pei, Z.J., Ning, F.D., and Cong, W.L., 2016, “Carbon nanotube reinforced fused deposition modeling using microwave irradiation,” Proceedings of the ASME 2016 International Manufacturing Science and Engineering Conference (MSEC2016-8790), June 27 - July 01, 2016, Blacksburg, Virginia, USA.
[C3]. Ning, F.D., Cong, W.L., Wei, J.H., Wang, S.R., and Zhang, M., 2015, “Additive manufacturing of CFRP composites using fused deposition modeling: effects of carbon fiber content and length,” Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference (MSEC2015-9436), June 8-12, 2015, Charlotte, North Carolina, USA.
[C2]. Ning, F.D., and Cong, W.L., 2015, “Rotary ultrasonic machining of CFRP: design of experiment with a cutting force model,” Proceedings of the ASME 2015 International Manufacturing Science and Engineering Conference (MSEC2015-9227), June 8-12, 2015, Charlotte, North Carolina, USA.
[C1]. Ning, F.D., Wang, F.J., and Ma, J.W., 2014, “A new modeling method for cutting forces in side milling of aluminum alloy,” Proceedings of 2014 International Conference on Mechanical Design, Manufacture and Automation Engineering (MDMAE2014), pp. 420-424, January 11-12, 2014, Phuket, Thailand.